# Hyperliquid Sentry Peering for Node Operators

Connect a Hyperliquid non-validating node you operate to 3 dedicated peer IPs on Quicknode sentry nodes across multiple datacenters in Tokyo. Full mempool streaming, 99.99% SLA-backed uptime, and direct engineer support are included for $500/month.

The $500/month price covers peering. An active Quicknode plan is also required.

**URL:** https://www.quicknode.com/hyperliquid-peering

## Who it is for

Hyperliquid Peering is for teams that run and maintain their own Hyperliquid non-validating node. It provides redundant sentry peer endpoints across multiple datacenters in Tokyo for blocks and the raw mempool. Teams that only need managed APIs can use a [Quicknode Hyperliquid endpoint](https://www.quicknode.com/chains/hyperliquid) instead.

Direct peering removes a separate API or stream delivery layer. Actual latency depends on your node placement and network conditions, so measure it from the server you plan to use.

## Peering vs a managed Hyperliquid endpoint

| | Hyperliquid Peering | Quicknode Hyperliquid endpoint |
|---|---|---|
| You run the node | Yes, your own non-validating node | No, Quicknode runs it |
| What you connect to | 3 dedicated sentry peer IPs | Managed API endpoint |
| Mempool | Full, unmetered | Via gRPC |
| Delivery | Peer-to-peer, blocks and mempool | JSON-RPC, WebSocket, gRPC, Streams |
| Pricing | $500/month plus active plan | Credit-based on your plan |
| Setup | Manual, engineer-provisioned | Self-serve, instant |
| Best for | Market makers, HFT, own-node operators | dApps, bots, analytics, indexers |

## One flat plan

The $500 monthly peering plan includes:

- 3 dedicated peer IPs on Quicknode sentry nodes across multiple datacenters in Tokyo
- Full mempool streaming with no separate usage meter
- 99.99% SLA-backed uptime, monitored and alerted
- Direct engineer support by email, including APAC coverage
- The same sentry layer used by Quicknode's own non-validating nodes

Observed raw mempool volume is approximately 1.1 TB/day. Actual volume varies with network activity.

## Specs

| Spec | Detail |
|---|---|
| Sentry peer IPs | 3, dedicated |
| Regions | Multiple datacenters, Tokyo |
| Mempool | Full, no separate usage meter |
| Observed mempool volume | ~1.1 TB/day (varies with activity) |
| Node type supported | Non-validating |
| Support | Direct engineer email, APAC coverage |
| Uptime SLA | 99.99%, monitored and alerted |
| Price | $500/month, active Quicknode plan required |
| Activation | Manual, engineer-provisioned |
| Evaluation window | 7 days from activation, prorated refund |

## How activation works

Provisioning is manual:

1. [Create an account](https://www.quicknode.com/signup) if needed. Then, when signed in, [subscribe to Hyperliquid Peering](https://dashboard.quicknode.com/add-ons/hyperliquid-peering).
2. Email support@quicknode.com with your Quicknode account email and server public IP.
3. A Quicknode engineer reviews the request, allowlists the node, and sends all 3 sentry peer IPs with configuration guidance.
4. Add all 3 peers and verify block delivery, full mempool flow, latency, recovery after disconnects, and uptime from your own environment.

## Evaluation

The subscription is charged at checkout, and the 7-day evaluation begins when service is activated. Evaluate the service with your real node, then contact Quicknode within 7 days of activation for a prorated refund if stability does not meet your requirements.

## FAQ

**What is Hyperliquid sentry peering?**
A direct connection between a Hyperliquid node you operate and Quicknode's sentry nodes, so your node receives blocks and the full mempool over dedicated peers instead of variable public root peers. Peering is $500/month for 3 dedicated peer IPs across multiple datacenters in the Tokyo region.

**Do I need to run my own Hyperliquid node?**
Yes. Peering is only useful if you already operate your own Hyperliquid non-validating node. Quicknode does not run the node for you. If you want Hyperliquid blocks, trades, or transactions delivered to your application without running node infrastructure, use a Quicknode Hyperliquid endpoint over gRPC or WebSocket instead.

**What is the difference between peering and a managed Hyperliquid endpoint?**
Peering connects a node you run to our sentry peers for redundant blocks and the full mempool. A managed Quicknode Hyperliquid endpoint is an API we run for you, delivered over JSON-RPC, WebSocket, gRPC, and Streams. Peering suits teams that have already committed to their own node; a managed endpoint suits everyone else.

**How is this different from public root peers or the Foundation non-validating node?**
Public root peers are free but shared and variable, and many are not configured to pass mempool data. Peering to the Hyperliquid Foundation's non-validating node requires 10,000 HYPE staked and Tier 1 maker rebate status, meaning over 0.5% of 14-day weighted maker volume. Quicknode peering has no staking or volume requirement.

**Will this make my node faster than other participants?**
No. Peering gives you a reliable, redundant path to blocks and the full mempool without per-MB metering. It does not put you ahead of other peers, and the three IPs are for redundancy, not for an edge. Actual latency depends on where your node runs and your network path to our peers.

**Are the peers validators or sentries?**
Sentries. You connect to non-validating sentry nodes that are themselves connected to a validator. Every validator has two sentry peers. Your peers do not participate in consensus, and peering does not involve staking or delegation. Our own non-validating nodes peer through the same sentry layer.

**Will I actually get the full mempool?**
Yes. Mempool streaming is included with no separate usage meter. Getting mempool from a peer requires that peer to be configured to pass it, which is why arbitrary public peers often do not deliver it. Quicknode sentries are configured for mempool delivery.

**How much mempool data should I plan for?**
Observed raw mempool volume is approximately 1.1 TB/day and varies with network activity, running higher during volatile periods. Size your server's bandwidth, disk capacity, and retention policy accordingly before you provision.

**Where are the peers located?**
The peers are across multiple datacenters in the Tokyo region. We share the IPs after you sign up and add you to our allowlist.

**How many peer IPs do I get?**
Three. All three are returned at activation.

**How do I configure my node?**
You add our peer IPs to `~/override_gossip_config.json` and set `split_client_blocks: true`. Mempool transactions are then written to `~/hl/data/mempool_txs/` on your server. This is the standard Hyperliquid node mechanism, not a custom Quicknode interface.

**Do I still need a Quicknode plan?**
Yes. Peering is an add-on and requires an active Quicknode plan alongside the monthly peering fee.

**What happens after I subscribe?**
Activation is manual. Email support@quicknode.com with your Quicknode account email and the node's public IP address. An engineer reviews the request, allowlists your node, and returns all three peer IPs with configuration guidance.

**What if my server IP changes?**
Email support and we will update the allowlist. Allowlisting is per IP, so any change to your node's public IP needs to be sent to us. Send the new IP ahead of a planned migration.

**Can I evaluate before committing?**
Yes. The subscription is charged at checkout, but you have 7 days from activation to test latency, disconnect recovery, uptime, and sustained mempool delivery. Contact us within that window for a prorated refund if stability does not meet your requirements. To check fit before subscribing, email support@quicknode.com.

**What does the 99.99% uptime cover?**
Availability of your sentry peer connections, monitored and alerted by the team that operates them. It does not cover the uptime of your own node.

**Who supports this?**
The engineers who operate the sentry layer. Support is by email with APAC coverage, and we can open a shared channel with a named engineer for setup and ongoing operations.

## Get started

- [Create an account](https://www.quicknode.com/signup)
- [Subscribe now](https://dashboard.quicknode.com/add-ons/hyperliquid-peering) (sign-in required)
- [Contact support](https://support.quicknode.com/)
- [Email support](mailto:support@quicknode.com?subject=Hyperliquid%20Peering%20service%20fit)