// SPDX-License-Identifier: MIT pragma solidity 0.6.12; /* Website - https://www.digifundtoken.com Twitter - https://twitter.com/digifund_token Telegram - https://t.me/digifund_token Welcome to DigiFund, a decentralised investment fund where your percentage of token supply is reflected as your percent of ownership of total project reserves in the treasury fund. */ interface IERC20 { function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval( address indexed owner, address indexed spender, uint256 value ); } library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * === * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * === */ function isContract(address account) internal view returns (bool) { // According to EIP-1052, 0x0 is the value returned for not-yet created accounts // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned // for accounts without code, i.e. `keccak256('')` bytes32 codehash; bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470; // solhint-disable-next-line no-inline-assembly assembly { codehash := extcodehash(account) } return (codehash != accountHash && codehash != 0x0); } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require( address(this).balance >= amount, "Address: insufficient balance" ); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{value: amount}(""); require( success, "Address: unable to send value, recipient may have reverted" ); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return _functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue( target, data, value, "Address: low-level call with value failed" ); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require( address(this).balance >= value, "Address: insufficient balance for call" ); return _functionCallWithValue(target, data, value, errorMessage); } function _functionCallWithValue( address target, bytes memory data, uint256 weiValue, string memory errorMessage ) private returns (bytes memory) { require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value: weiValue}(data); if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } contract Ownable is Context { address private _owner; address private _previousOwner; uint256 private _lockTime; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } function getUnlockTime() public view returns (uint256) { return _lockTime; } //Locks the contract for owner for the amount of time provided function lock(uint256 time) public virtual onlyOwner { require( time <= (block.timestamp + 31536000), "Only lockable for up to 1 year" ); _previousOwner = _owner; _owner = address(0); _lockTime = now + time; emit OwnershipTransferred(_owner, address(0)); } //Unlocks the contract for owner when _lockTime is exceeds function unlock() public virtual { require( _previousOwner == msg.sender, "You don't have permission to unlock" ); require(now > _lockTime, "Contract is locked"); emit OwnershipTransferred(_owner, _previousOwner); _owner = _previousOwner; } } interface IUniswapV2Factory { event PairCreated( address indexed token0, address indexed token1, address pair, uint256 ); function feeTo() external view returns (address); function feeToSetter() external view returns (address); function getPair(address tokenA, address tokenB) external view returns (address pair); function allPairs(uint256) external view returns (address pair); function allPairsLength() external view returns (uint256); function createPair(address tokenA, address tokenB) external returns (address pair); function setFeeTo(address) external; function setFeeToSetter(address) external; } interface IUniswapV2Pair { event Approval( address indexed owner, address indexed spender, uint256 value ); event Transfer(address indexed from, address indexed to, uint256 value); function name() external pure returns (string memory); function symbol() external pure returns (string memory); function decimals() external pure returns (uint8); function totalSupply() external view returns (uint256); function balanceOf(address owner) external view returns (uint256); function allowance(address owner, address spender) external view returns (uint256); function approve(address spender, uint256 value) external returns (bool); function transfer(address to, uint256 value) external returns (bool); function transferFrom( address from, address to, uint256 value ) external returns (bool); function DOMAIN_SEPARATOR() external view returns (bytes32); function PERMIT_TYPEHASH() external pure returns (bytes32); function nonces(address owner) external view returns (uint256); function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; event Mint(address indexed sender, uint256 amount0, uint256 amount1); event Burn( address indexed sender, uint256 amount0, uint256 amount1, address indexed to ); event Swap( address indexed sender, uint256 amount0In, uint256 amount1In, uint256 amount0Out, uint256 amount1Out, address indexed to ); event Sync(uint112 reserve0, uint112 reserve1); function MINIMUM_LIQUIDITY() external pure returns (uint256); function factory() external view returns (address); function token0() external view returns (address); function token1() external view returns (address); function getReserves() external view returns ( uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast ); function price0CumulativeLast() external view returns (uint256); function price1CumulativeLast() external view returns (uint256); function kLast() external view returns (uint256); function mint(address to) external returns (uint256 liquidity); function burn(address to) external returns (uint256 amount0, uint256 amount1); function swap( uint256 amount0Out, uint256 amount1Out, address to, bytes calldata data ) external; function skim(address to) external; function sync() external; function initialize(address, address) external; } interface IUniswapV2Router01 { function factory() external pure returns (address); function WETH() external pure returns (address); function addLiquidity( address tokenA, address tokenB, uint256 amountADesired, uint256 amountBDesired, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline ) external returns ( uint256 amountA, uint256 amountB, uint256 liquidity ); function addLiquidityETH( address token, uint256 amountTokenDesired, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external payable returns ( uint256 amountToken, uint256 amountETH, uint256 liquidity ); function removeLiquidity( address tokenA, address tokenB, uint256 liquidity, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline ) external returns (uint256 amountA, uint256 amountB); function removeLiquidityETH( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external returns (uint256 amountToken, uint256 amountETH); function removeLiquidityWithPermit( address tokenA, address tokenB, uint256 liquidity, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountA, uint256 amountB); function removeLiquidityETHWithPermit( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountToken, uint256 amountETH); function swapExactTokensForTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapTokensForExactTokens( uint256 amountOut, uint256 amountInMax, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapExactETHForTokens( uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external payable returns (uint256[] memory amounts); function swapTokensForExactETH( uint256 amountOut, uint256 amountInMax, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapExactTokensForETH( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapETHForExactTokens( uint256 amountOut, address[] calldata path, address to, uint256 deadline ) external payable returns (uint256[] memory amounts); function quote( uint256 amountA, uint256 reserveA, uint256 reserveB ) external pure returns (uint256 amountB); function getAmountOut( uint256 amountIn, uint256 reserveIn, uint256 reserveOut ) external pure returns (uint256 amountOut); function getAmountIn( uint256 amountOut, uint256 reserveIn, uint256 reserveOut ) external pure returns (uint256 amountIn); function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts); function getAmountsIn(uint256 amountOut, address[] calldata path) external view returns (uint256[] memory amounts); } interface IUniswapV2Router02 is IUniswapV2Router01 { function removeLiquidityETHSupportingFeeOnTransferTokens( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external returns (uint256 amountETH); function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountETH); function swapExactTokensForTokensSupportingFeeOnTransferTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external; function swapExactETHForTokensSupportingFeeOnTransferTokens( uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external payable; function swapExactTokensForETHSupportingFeeOnTransferTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external; } interface IRouterPair { event Mint(address indexed sender, uint256 amount0, uint256 amount1); event Burn( address indexed sender, uint256 amount0, uint256 amount1, address indexed to ); event Swap( address indexed sender, uint256 amount0In, uint256 amount1In, uint256 amount0Out, uint256 amount1Out, address indexed to ); event Sync(uint112 reserve0, uint112 reserve1); function factory() external view returns (address); function token0() external view returns (address); function token1() external view returns (address); function getReserves() external view returns ( uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast ); function price0CumulativeLast() external view returns (uint256); function price1CumulativeLast() external view returns (uint256); function kLast() external view returns (uint256); function sweptAmount() external view returns (uint256); function sweepableToken() external view returns (address); function liquidityLocked() external view returns (uint256); function mint(address to) external returns (uint256 liquidity); function burn(address to) external returns (uint256 amount0, uint256 amount1); function swap( uint256 amount0Out, uint256 amount1Out, address to, bytes calldata data ) external; function skim(address to) external; function sync() external; function initialize( address, address, uint256 ) external; function sweep(uint256 amount, bytes calldata data) external; function unsweep(uint256 amount) external; function getMaxSweepable() external view returns (uint256); } interface IRouterFactory { event PairCreated( address indexed token0, address indexed token1, address pair, uint256 ); function feeTo() external view returns (address); function feeToSetter() external view returns (address); function getPair(address tokenA, address tokenB) external view returns (address pair); function allPairs(uint256) external view returns (address pair); function allPairsLength() external view returns (uint256); function createPair(address tokenA, address tokenB) external returns (address pair); function setFeeTo(address) external; function setFeeToSetter(address) external; } interface IRouterRouter { function factory() external pure returns (address); function WETH() external pure returns (address); function addLiquidity( address tokenA, address tokenB, uint256 amountADesired, uint256 amountBDesired, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline ) external returns ( uint256 amountA, uint256 amountB, uint256 liquidity ); function addLiquidityETH( address token, uint256 amountTokenDesired, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external payable returns ( uint256 amountToken, uint256 amountETH, uint256 liquidity ); function removeLiquidity( address tokenA, address tokenB, uint256 liquidity, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline ) external returns (uint256 amountA, uint256 amountB); function removeLiquidityETH( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external returns (uint256 amountToken, uint256 amountETH); function removeLiquidityWithPermit( address tokenA, address tokenB, uint256 liquidity, uint256 amountAMin, uint256 amountBMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountA, uint256 amountB); function removeLiquidityETHWithPermit( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountToken, uint256 amountETH); function swapExactTokensForTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapTokensForExactTokens( uint256 amountOut, uint256 amountInMax, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapExactETHForTokens( uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external payable returns (uint256[] memory amounts); function swapTokensForExactETH( uint256 amountOut, uint256 amountInMax, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapExactTokensForETH( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external returns (uint256[] memory amounts); function swapETHForExactTokens( uint256 amountOut, address[] calldata path, address to, uint256 deadline ) external payable returns (uint256[] memory amounts); function quote( uint256 amountA, uint256 reserveA, uint256 reserveB ) external pure returns (uint256 amountB); function getAmountOut( uint256 amountIn, uint256 reserveIn, uint256 reserveOut ) external pure returns (uint256 amountOut); function getAmountIn( uint256 amountOut, uint256 reserveIn, uint256 reserveOut ) external pure returns (uint256 amountIn); function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts); function getAmountsIn(uint256 amountOut, address[] calldata path) external view returns (uint256[] memory amounts); function removeLiquidityETHSupportingFeeOnTransferTokens( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline ) external returns (uint256 amountETH); function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens( address token, uint256 liquidity, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint256 amountETH); function swapExactTokensForTokensSupportingFeeOnTransferTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external; function swapExactETHForTokensSupportingFeeOnTransferTokens( uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external payable; function swapExactTokensForETHSupportingFeeOnTransferTokens( uint256 amountIn, uint256 amountOutMin, address[] calldata path, address to, uint256 deadline ) external; } contract DFUND is Context, IERC20, Ownable { using SafeMath for uint256; using Address for address; IUniswapV2Router02 public uniswapV2Router; mapping(address => uint256) private _rOwned; mapping(address => uint256) private _tOwned; mapping(address => mapping(address => uint256)) private _allowances; mapping(address => bool) private _isExcludedFromFee; mapping(address => bool) private _isExcluded; mapping (address => bool) private _isSniper; string private _name = "DigiFund"; string private _symbol = "DFUND"; uint8 private _decimals = 9; uint256 private constant MAX = ~uint256(0); uint256 private _tTotal = 100000000 * 10**9; uint256 private _rTotal = (MAX - (MAX % _tTotal)); uint256 private _tFeeTotal; uint256 private _tBurnTotal; uint256 public _feeDecimal = 2; // Transfer Fees uint256 public _liquidityFee = 500; uint256 public _taxFee = 100; uint256 public _burnFee; uint256 private _previousTaxFee = _taxFee; uint256 private _previousBurnFee = _burnFee; uint256 private _previousLiquidityFee = _liquidityFee; uint256 public maxTxAmount = 500000 * 10**9; uint256 public numTokensSellToAddToLiquidity = 100000 * 10**9; uint256 public liquidityPart = 10; uint256 public snipersCaught; uint256 private liqAddBlock; uint256 private snipeBlockAmt; address public uniswapV2Pair; address payable public digiFundWallet = 0xdF487A2DAfB8c3116d4dc2299365933FbF9b27ED; address payable public digiMarketingWallet = 0x7342d9A4F7cC68106A9B10E8771172710145157f; bool public swapAndLiquifyEnabled = true; bool public _hasLiqBeenAdded; bool private inSwapAndLiquify; bool private inBurn; event SniperCaught(address sniperAddress); event SwapAndLiquifyEnabledUpdated(bool enabled); event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiqudity); event SetNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity); event SetBurnFee(uint256 newBurnFee); event SetTaxFee(uint256 newTaxFee); event SetLiquidityFee(uint256 newLiquidityFee); event SetDFUNDWallet(address newTreasuryWallet, address digiMarketingWallet); event DFUNDBurnPayoutRequest(uint256 rBurn, address, uint256 percentBurnt); event ReceiveFallback(address,uint256); modifier lockTheSwap { inSwapAndLiquify = true; _; inSwapAndLiquify = false; } modifier lockTheBurn { inBurn = true; _; inBurn = false; } address[] private _excluded; constructor(uint256 _snipeBlockAmt) public { _rOwned[_msgSender()] = _rTotal; //exclude owner and this contract from fee _isExcludedFromFee[owner()] = true; _isExcludedFromFee[address(this)] = true; IUniswapV2Router02 _uniswapRouter = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); uniswapV2Pair = IUniswapV2Factory(_uniswapRouter.factory()).createPair(address(this), _uniswapRouter.WETH()); uniswapV2Router = _uniswapRouter; snipeBlockAmt = _snipeBlockAmt; _isExcludedFromFee[owner()] = true; _isExcludedFromFee[address(this)] = true; _isExcluded[uniswapV2Pair] = true; _excluded.push(uniswapV2Pair); emit Transfer(address(0), _msgSender(), _tTotal); } receive() external payable { emit ReceiveFallback(msg.sender, msg.value); } function name() public view returns (string memory) { return _name; } function symbol() public view returns (string memory) { return _symbol; } function decimals() public view returns (uint8) { return _decimals; } function totalSupply() public view override returns (uint256) { return _tTotal; } function balanceOf(address account) public view override returns (uint256) { if (_isExcluded[account]) return _tOwned[account]; return tokenFromReflection(_rOwned[account]); } function transfer(address recipient, uint256 amount) public override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } function allowance(address owner, address spender) public view override returns (uint256) { return _allowances[owner][spender]; } function approve(address spender, uint256 amount) public override returns (bool) { _approve(_msgSender(), spender, amount); return true; } function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) { _transfer(sender, recipient, amount); _approve( sender, _msgSender(), _allowances[sender][_msgSender()].sub( amount, "ERC20: transfer amount exceeds allowance" ) ); return true; } function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue) ); return true; } function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].sub( subtractedValue, "ERC20: decreased allowance below zero" ) ); return true; } function isExcludedFromReward(address account) public view returns (bool) { return _isExcluded[account]; } function totalFees() public view returns (uint256) { return _tFeeTotal; } function totalBurn() public view returns (uint256) { return _tBurnTotal; } function getCirculatingSupply() public view returns (uint256) { uint256 burnAddressTokens = balanceOf(0x000000000000000000000000000000000000dEaD).add(balanceOf(0x0000000000000000000000000000000000000000)); return totalSupply().sub(burnAddressTokens); } function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns (uint256) { require(tAmount <= _tTotal, "Amount must be less than supply"); if (!deductTransferFee) { (uint256 rAmount, , , , , , ) = _getValues(tAmount); return rAmount; } else { (, uint256 rTransferAmount, , , , , ) = _getValues(tAmount); return rTransferAmount; } } function tokenFromReflection(uint256 rAmount) public view returns (uint256) { require( rAmount <= _rTotal, "Amount must be less than total reflections" ); uint256 currentRate = _getRate(); return rAmount.div(currentRate); } function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private { uint256 currentRate = _getRate(); ( uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn ) = _getValues(tAmount); uint256 rBurn = tBurn.mul(currentRate); _tOwned[sender] = _tOwned[sender].sub(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _takeLiquidity(tLiquidity); _reflectFee(rFee, rBurn, tFee, tBurn); emit Transfer(sender, recipient, tTransferAmount); } function _reflectFee(uint256 rFee, uint256 rBurn, uint256 tFee, uint256 tBurn) private { _rTotal = _rTotal.sub(rFee).sub(rBurn); _tBurnTotal = _tBurnTotal.add(tBurn); _tFeeTotal = _tFeeTotal.add(tFee); _tTotal = _tTotal.sub(tBurn); } function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) { ( uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn ) = _getTValues(tAmount); (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tBurn, _getRate()); return ( rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity, tBurn ); } function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256) { uint256 tFee = calculateTaxFee(tAmount); uint256 tLiquidity = calculateLiquidityFee(tAmount); uint256 tBurn = calculateBurnFee(tAmount); uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity).sub(tBurn); require(tTransferAmount > tFee.add(tLiquidity).add(tBurn), 'Amount is less than fees'); return (tTransferAmount, tFee, tLiquidity, tBurn); } function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn, uint256 currentRate) private pure returns (uint256, uint256, uint256) { uint256 rAmount = tAmount.mul(currentRate); uint256 rFee = tFee.mul(currentRate); uint256 rLiquidity = tLiquidity.mul(currentRate); uint256 rBurn = tBurn.mul(currentRate); uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity).sub(rBurn); return (rAmount, rTransferAmount, rFee); } function _getRate() private view returns (uint256) { (uint256 rSupply, uint256 tSupply) = _getCurrentSupply(); return rSupply.div(tSupply); } function _getCurrentSupply() private view returns (uint256, uint256) { uint256 rSupply = _rTotal; uint256 tSupply = _tTotal; for (uint256 i = 0; i < _excluded.length; i++) { if ( _rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply ) return (_rTotal, _tTotal); rSupply = rSupply.sub(_rOwned[_excluded[i]]); tSupply = tSupply.sub(_tOwned[_excluded[i]]); } if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal); return (rSupply, tSupply); } function _takeLiquidity(uint256 tLiquidity) private { uint256 currentRate = _getRate(); uint256 rLiquidity = tLiquidity.mul(currentRate); _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity); if (_isExcluded[address(this)]) _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity); } function calculateTaxFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_taxFee).div(10**(_feeDecimal + 2)); } function calculateBurnFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_burnFee).div(10**(_feeDecimal + 2)); } function calculateLiquidityFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_liquidityFee).div(10**(_feeDecimal + 2)); } function removeAllFee() private { if (_taxFee == 0 && _liquidityFee == 0 && _burnFee == 0) return; _previousTaxFee = _taxFee; _previousBurnFee = _burnFee; _previousLiquidityFee = _liquidityFee; _taxFee = 0; _burnFee = 0; _liquidityFee = 0; } function restoreAllFee() private { _taxFee = _previousTaxFee; _burnFee = _previousBurnFee; _liquidityFee = _previousLiquidityFee; } function isExcludedFromFee(address account) public view returns (bool) { return _isExcludedFromFee[account]; } function _approve( address owner, address spender, uint256 amount ) private { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } function _transfer( address from, address to, uint256 amount ) private { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); require(amount > 0, "Transfer amount must be greater than zero"); require(!_isSniper[from], "Sniper"); require(!_isSniper[to], "Sniper"); if (!_hasLiqBeenAdded) { _checkLiquidityAdd(from, to); } else { if (liqAddBlock > 0 && from == uniswapV2Pair && from != owner() && to != owner() ) { if (block.number - liqAddBlock < snipeBlockAmt) { _isSniper[to] = true; _isExcluded[to] = true; _excluded.push(to); snipersCaught ++; emit SniperCaught(to); //pow } } } if (from != owner() && to != owner() && !inSwapAndLiquify) require( amount <= maxTxAmount, "Transfer amount exceeds the maxTxAmount." ); uint256 contractTokenBalance = balanceOf(address(this)); if (contractTokenBalance >= maxTxAmount) { contractTokenBalance = maxTxAmount; } bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity; if ( overMinTokenBalance && !inSwapAndLiquify && from != uniswapV2Pair && swapAndLiquifyEnabled ) { contractTokenBalance = numTokensSellToAddToLiquidity; swapAndLiquify(contractTokenBalance); } bool takeFee = false; if(from == uniswapV2Pair && !inSwapAndLiquify && !_isExcludedFromFee[to]) { takeFee = true; } if (to == uniswapV2Pair && !inSwapAndLiquify && !_isExcludedFromFee[from]) { takeFee = true; } _tokenTransfer(from, to, amount, takeFee); restoreAllFee(); } function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap { uint256 halfOfLiquify = contractTokenBalance.div(liquidityPart); uint256 otherHalfOfLiquify = contractTokenBalance.div(liquidityPart); uint256 portionForFees = contractTokenBalance.sub(halfOfLiquify).sub(otherHalfOfLiquify); uint256 initialBalance = address(this).balance; // swap tokens for ETH swapTokensForEth(halfOfLiquify); uint256 newBalance = address(this).balance.sub(initialBalance); // add liquidity to uniswap addLiquidity(otherHalfOfLiquify, newBalance); sendETH(portionForFees); emit SwapAndLiquify(halfOfLiquify, newBalance, otherHalfOfLiquify); } function swapTokensForEth(uint256 tokenAmount) private { // generate the uniswap pair path of token -> weth address[] memory path = new address[](2); path[0] = address(this); path[1] = uniswapV2Router.WETH(); _approve(address(this), address(uniswapV2Router), tokenAmount); // make the swap uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens( tokenAmount, 0, // accept any amount of ETH path, address(this), block.timestamp ); } function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private { // approve token transfer to cover all possible scenarios _approve(address(this), address(uniswapV2Router), tokenAmount); // add the liquidity uniswapV2Router.addLiquidityETH{value: ethAmount}( address(this), tokenAmount, 0, // slippage is unavoidable 0, // slippage is unavoidable owner(), block.timestamp ); } function sendETH(uint256 amount) private { swapTokensForEth(amount); uint256 taxETH = address(this).balance; digiFundWallet.transfer(taxETH.mul(80).div(100)); digiMarketingWallet.transfer(taxETH.mul(20).div(100)); } //this method is responsible for taking all fee, if takeFee is true function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private { if (!takeFee) removeAllFee(); if (_isExcluded[sender] && !_isExcluded[recipient]) { _transferFromExcluded(sender, recipient, amount); } else if (!_isExcluded[sender] && _isExcluded[recipient]) { _transferToExcluded(sender, recipient, amount); } else if (!_isExcluded[sender] && !_isExcluded[recipient]) { _transferStandard(sender, recipient, amount); } else if (_isExcluded[sender] && _isExcluded[recipient]) { _transferBothExcluded(sender, recipient, amount); } else { _transferStandard(sender, recipient, amount); } if (!takeFee) restoreAllFee(); } function _transferStandard(address sender, address recipient, uint256 tAmount) private { uint256 currentRate = _getRate(); ( uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn ) = _getValues(tAmount); uint256 rBurn = tBurn.mul(currentRate); _rOwned[sender] = _rOwned[sender].sub(rAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _takeLiquidity(tLiquidity); _reflectFee(rFee, rBurn, tFee, tBurn); emit Transfer(sender, recipient, tTransferAmount); } function _transferToExcluded(address sender, address recipient, uint256 tAmount) private { uint256 currentRate = _getRate(); ( uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn ) = _getValues(tAmount); uint256 rBurn = tBurn.mul(currentRate); _rOwned[sender] = _rOwned[sender].sub(rAmount); _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _takeLiquidity(tLiquidity); _reflectFee(rFee, rBurn, tFee, tBurn); emit Transfer(sender, recipient, tTransferAmount); } function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private { uint256 currentRate = _getRate(); ( uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tBurn ) = _getValues(tAmount); uint256 rBurn = tBurn.mul(currentRate); _tOwned[sender] = _tOwned[sender].sub(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _takeLiquidity(tLiquidity); _reflectFee(rFee, rBurn, tFee, tBurn); emit Transfer(sender, recipient, tTransferAmount); } // sniper pow function _checkLiquidityAdd(address from, address to) private { require(!_hasLiqBeenAdded, "Liquidity already added and marked."); if (from == owner() && to == uniswapV2Pair) { _hasLiqBeenAdded = true; liqAddBlock = block.number; } } function isSniperCheck(address account) public view returns (bool) { return _isSniper[account]; } function addSniper(address sniperAddress) external onlyOwner() { require(sniperAddress != uniswapV2Pair, "ERC20: Can not add uniswapV2Pair to sniper list"); require(sniperAddress != address(uniswapV2Router), "ERC20: Can not add uniswapV2Router to sniper list"); _isSniper[sniperAddress] = true; } function removeSniper(address sniperAddress) external onlyOwner() { require(_isSniper[sniperAddress], "ERC20: Is not sniper"); _isSniper[sniperAddress] = false; } // owner only function removeLimits() external onlyOwner() { maxTxAmount = _tTotal; } function setNumTokensSellToAddToLiquidity(uint256 _numTokensSellToAddToLiquidity) external onlyOwner() { numTokensSellToAddToLiquidity = _numTokensSellToAddToLiquidity; emit SetNumTokensSellToAddToLiquidity(numTokensSellToAddToLiquidity); } function setSwapAndLiquifyEnabled(bool _enabled) external onlyOwner() { swapAndLiquifyEnabled = _enabled; emit SwapAndLiquifyEnabledUpdated(_enabled); } function setFees(uint256 BurnFee, uint256 TaxFee, uint256 LiquidityFee) external onlyOwner() { require((BurnFee + TaxFee + LiquidityFee) <= 600, "Fees too high, must remain less than 6%"); _burnFee = BurnFee; _taxFee = TaxFee; _liquidityFee = LiquidityFee; emit SetBurnFee(BurnFee); emit SetTaxFee(TaxFee); emit SetLiquidityFee(LiquidityFee); } function excludeFromReward(address account) public onlyOwner() { require(!_isExcluded[account], "Account is already excluded"); if (_rOwned[account] > 0) { _tOwned[account] = tokenFromReflection(_rOwned[account]); } _isExcluded[account] = true; _excluded.push(account); } function includeInReward(address account) external onlyOwner() { require(_isExcluded[account], "Account is already included"); for (uint256 i = 0; i < _excluded.length; i++) { if (_excluded[i] == account) { _excluded[i] = _excluded[_excluded.length - 1]; _tOwned[account] = 0; _isExcluded[account] = false; _excluded.pop(); break; } } } function excludeFromFee(address account) public onlyOwner() { require(!_isExcludedFromFee[account], "Account is already excluded"); _isExcludedFromFee[account] = true; } function includeInFee(address account) public onlyOwner() { require(_isExcludedFromFee[account], "Account is already included"); _isExcludedFromFee[account] = false; } function setDigiFundWallet(address payable _digiFundWallet, address payable _digiMarketingWallet) external onlyOwner() { digiFundWallet = _digiFundWallet; digiMarketingWallet = _digiMarketingWallet; emit SetDFUNDWallet(_digiFundWallet, _digiMarketingWallet); } // Admin functions to remove tokens mistakenly sent to this address function transferAnyTokens(address _tokenAddr, address _to, uint256 _amount) external onlyOwner() { require(IERC20(_tokenAddr).transfer(_to, _amount), "Transfer failed"); } function transferETH(address payable recipient, uint256 amount) external onlyOwner() { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{ value: amount }(""); require(success, "Address: unable to send value, recipient may have reverted"); } function DFUNDBurnPayout(uint256 rBurn) external lockTheBurn { require(rBurn > 0, "Not enough"); uint256 rBurnX = rBurn * 10**9; require(balanceOf(msg.sender) > rBurnX, "Not enough"); _rOwned[msg.sender] -= rBurnX; _tBurnTotal = _tBurnTotal.add(rBurnX); _tTotal = _tTotal.sub(rBurnX); emit DFUNDBurnPayoutRequest(rBurnX, msg.sender, _tTotal); } }

DigiFund V1

Begin met bouwen op QuickNode

Broncode: